Gpon home gateway default password

• • • • • • • • • Table of Contents • • • • • • Introduction and Network Diagram The UFiber GPON equipment is designed to provide robust hardware that is ease to deploy and manage. This article provides the steps needed to log into the OLT and start configuring the UFiber network. The UFiber network can be monitored and managed using the built-in Web UI or theUbiquiti Network Management System ( Example scenario using the Accessing the Management Interface By default, the UFiber OLTs are managed through the dedicated management port. In order to log in to the OLT, follow the steps below: 1. Connect an Ethernet cable from a computer to the eth0(management) interface on the OLT. 2. Configure a static IP address of your computer in the 192.168.1.0/24 range (for example 192.168.1.11). ATTENTION: Starting from the 192.168.1.20. On older firmware versions, the address was statically set to 192.168.1.1. 3. Open a web browser and enter 4.Log into the OLT using the default credentials. Username: ubnt Password: ubnt Upgrading the Firmware After logging into the OLT, it is recommended to upgrade the firmware to the latest stable UFiber release. The latest UFiber OLT firmware can be downloaded fromthe UFiber GUI: Access the UF-OLT Web UI. 1. Navigate to the Systemsettings tab. 2. Select the Firmware upgrade button in the System actions sectionand browse your filesystem for the firmware release you wish to upload. 3. Wait for the firmware to be uploaded to the OLT. 4. Reboot the device...

• Unplug your gateway’s power. • Press and hold the Reset button. • Keep pressing the button and plug the gateway back in. • Hold the button for another 30 seconds. • Wait for your gateway to restart. • Log in with the password on your gateway’s label. • Change your name and password to something easy to remember. How do I change my GPON home gateway admin password? Steps to change the Modems Gateway Login Username and Password • Open a web browser such as Internet Explorer, Google Chrome, Firefox, Safari etc. • In the address bar of the web browser type 192.168.0.1 and hit Enter. • When at the login page type “admin” for the Username and type “motorola” for the Password, then click Login. How do I find my default gateway username and password? This information can sometimes be found on your router, or in your information guide. If you can’t find it on either, find the model number of your router (on the box or router itself) and use this website (www.routerpasswords.com) to find the default username and password. How do I log into my gateway? Gateway Router Login • Connect router cable to your Laptop or Computer. • Open your web browser of choice and type IP address of your Gateway router in the address bar. • Now enter the default username and password of your router by accessing the admin panel.