What happens when the transport input ssh command is entered on the switch vty lines?

NOTE: If you have the new question on this test, please comment Question and Multiple-Choice list in form below this article. We will update answers for you in the shortest time. Thank you! We truly value your contribution to the website. CCNA 1 – Introduction to Networks (Version 7.00) – ITNv7 Final Exam Answers Full Number of questions: 60; Passed score: 80-100% 1. Which two traffic types use the Real-Time Transport Protocol (RTP)? (Choose two.) • video • web • file transfer • voice • peer to peer 2. Which wireless technology has low-power and data rate requirements making it popular in home automation applications? • ZigBee • LoRaWAN • 5G • Wi-Fi Explanation: ZigBee is an IEEE 802.15.4 wireless standard designed for creating personal-area networks. Low energy, power, and data rate requirements make Zigbee a popular protocol for connecting home automation devices. 3. Which layer of the TCP/IP model provides a route to forward messages through an internetwork? • application • network access • internet • transport Explanation: Peer-to-peer (P2P) networks have two or more network devices that can share resources such as printers or files without having a dedicated server. 10. What characteristic describes a virus? • a network device that filters access and traffic coming into a network • the use of stolen credentials to access private data • an attack that slows or crashes a device or network service • malicious software or code running on an end device 11. Three bank emplo...

Networking Devices and Initial Configuration Module 11.5.3 Build a Small Cisco Network Quiz Answers 1. A user can print to a printer that is on the same network, but the traffic of the user cannot reach the internet. What is a possible cause of the problem? • The PC default gateway address is missing or incorrect. • The PC has an incorrect IP address. • The network cable connected to the user PC is faulty. • The NIC on the PC is faulty. Explanation: A CLI session using Secure Shell (SSH) provides enhanced security because SSH supports strong passwords and encryption during the transport of session data. The other methods support authentication but not encryption. 3. On which switch interface would an administrator configure an IP address so that the switch can be managed remotely? • FastEthernet0/1 • VLAN 1 • vty 0 • console 0 Explanation: Interface VLAN 1 is a virtual interface on a switch, called SVI (switch virtual interface). Configuring an IP address on the default SVI, interface VLAN 1, will allow a switch to be accessed remotely. The VTY line must also be configured to allow remote access, but an IP address cannot be configured on this line. 4. An administrator defined a local user account with a secret password on router R1 for use with SSH. Which three additional steps are required to configure R1 to accept only encrypted SSH connections? (Choose three.) • Configure the IP domain name on the router. • Enable inbound vty Telnet sessions. • Generate the SSH keys. • ...

35. What happens when the transport input ssh command is entered on the switch vty lines? o The SSH client on the switch is enabled. o Communication between the switch and remote users is encrypted. o The switch requires a username/password combination for remote access. o The switch requires remote connections via a proprietary client software. The transport input ssh command when entered on the switch vty (virtual terminal lines) will enc inbound controlled telnet connections. Answers Explanation & Hints: When a host sends packets to a destination outside of its local network, the first hop IP address encountered is the default gateway. 37. Match the configuration mode with the command that is available in that mode. (Not all options are used.) CCNA1 v7 – ITNv7 – Modules 8 – 10 Communicating Between Networks Exam Answers 006 Answers Explanation & Hints:

Introduction This document describes how to configure and debug Secure Shell (SSH) on Cisco routers or switches that run Cisco IOS ® Software. Prerequisites Requirements The Cisco IOS image used must be a k9(crypto) image in order to support SSH. For example c3750e-universalk9-tar.122-35.SE5.tar is a k9 (crypto) image. Components Used The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, ensure that you understand the potential impact of any command. The information in this document is based on Cisco IOS 3600 Software (C3640-IK9S-M), Release 12.2(2)T1. SSH was introduced into these Cisco IOS platforms and images: • SSH terminal-line access (also known as reverse-Telnet) was introduced in Cisco IOS platforms and images start in Cisco IOS Software Release 12.2.2.T. • SSH Version 2.0 (SSH v2) support was introduced in Cisco IOS platforms and images start in Cisco IOS Software Release 12.1(19)E. Conventions Refer to SSH v2 Network Diagram Test Authentication Authentication Test without SSH First test the authentication without SSH to make sure that authentication works with the router Carter before you add SSH. Authentication can be with a local username and password or with an authentication, authorization, and accounting (AAA) server that runs TACACS+ or RADIUS. (Authentication through the line password is not possible with ...

1. If a network administrator enters these commands on a switch, what will be the result? Switch1(config-line)# line console 0 Switch1(config-line)# password cisco Switch1(config-line)# login to secure the console port with the password "cisco" to deny access to the console port by specifying 0 lines are available to gain access to line configuration mode by supplying the required password to configure the privilege exec password that will be used for remote access 2. Which command line interface (CLI) mode allows users to configure switch parameters, such as the hostname and password? user EXEC mode privileged EXEC mode global configuration mode interface configuration mode 3. What happens when the transport input ssh command is entered on the switch vty lines? The SSH client on the switch is enabled. Communication between the switch and remote users is encrypted. A username/password combination is no longer needed to establish a secure remote connection to the switch. The switch requires remote connections via proprietary client software. 4. A network administrator uses the CLI to enter a command that requires several parameters. The switch responds with "% Incomplete command". The administrator cannot remember the missing parameters. What can the administrator do to get the parameter information? append ? to the last parameter append a space and then ? to the last parameter use Ctrl-P to show a parameter list use the Tab key to show which options are available 5. When a...

Table of Contents • • • • • • • • What happens to the transport input ssh? What happens when the transport input ssh command is entered on the switch vty lines? The SSH client on the switch is enabled. Communication between the switch and remote users is encrypted. The switch requires a username/password combination for remote access. What is telnet transport SSH? Answer -2 : If the command is ” TRANSPORT INPUT TELNET SSH “, then the system will accept remote access by default through telnet, but if SSH is enabled it will accept SSH. What is transport input all? ´transport input all´ would allow the following protocols for inbound connections to your router: lat | mop | nasi | pad | rlogin | ssh | telnet | v120. For outbound connections, you indeed need the ´transport output´ command, and then specify the protocols required. Which of the following commands will you use to enable SSH version 2 for login? Steps to configure SSH: Configure the router hostname using command “hostname”. Configure the domain name using command “ip domain-name”. Generate public and private keys using command “crypto key generate rsa”. Create a user in the local database using command “username… What is the difference in line vty 0 4 and 5 15? VTY is a virtual port and used to get Telnet or SSH access to the device. VTY is solely used for inbound connections to the device. In a way, we may say that 5 (0 – 4) are connection ports to the Router or Switch. In fact, we may have connection ports up to ...

Refer to the exhibit. The network administrator needs to setup Switch1 for remote access from HostA. Theshow ip interface brief is issued on Router1 and the show interfaces trunk command is issued on theSwitch1 to verify the current status. The administrator applies the additional configuration shown in theexhibit to Switch1. However, the telnet from HostA fails. What additional commands need to be appliedto the switch? • Refer to the exhibit. Which two facts can be confirmed by this output? (Choose two.) • This switch shows no configuration revision errors. • This switch has established two-way communication with the neighboring devices. • This switch is configured to advertise its VLAN configuration to other VTP-enabled switches in the same VTP domain. • This switch will drop all VTP advertisements that come from the switches that are configured in the same VTP domain. • This switch will cause no disruption in the VTP domain operations if the rest of the switches in the same VTP domain have a higher configuration revision number • Refer to the exhibit. The network administrator needs to remove the east-hosts VLAN and use the switch port from that VLAN in one of the existing VLANs. What two commands should be used when completely removing VLAN 2 from S1-Central while leaving the switch and all its interfaces operational? (Choose two) •