Refer to the exhibit. how is the connector used in a pc?

Explanation: The power supply converts alternating current (AC) power coming from a wall outlet into direct current (DC) power, which is of lower voltage. DC power is required for all the components inside the computer. 2. Which two motherboard components connect to the Northbridge chipset? (Choose two.) NIC USB 2.0 devices USB 3.0 devices FireWire devices RAM * video card * Explanation: The Northbridge chipset allows the fastest components to interface with the CPU at the front side bus speed, namely the RAM and video card. All other components like the USB, FireWire, and the expansion buses communicate with the CPU via the Southbridge chipset. 3. What type of connector can be used to connect an internal hard drive to the motherboard? USB SATA * eSATA Thunderbolt Explanation: A KVM switch is commonly used to connect one mouse, keyboard, and monitor to multiple computers. 5. Which is the correct procedure to put out a fire with a fire extinguisher after the pin is pulled? Aim just above the flame, squeeze the lever, and sweep from side to side. Aim at the base of the flame, squeeze the lever, and sweep from side to side. * Aim directly at the center of the flame, squeeze the lever, and sweep from side to side. Aim at the base of the flame, squeeze the lever, and sweep from the base to the top of the flame. Aim just above the flame, squeeze the lever, and sweep from the top to the base of the flame. Explanation: Anyone using a fire extinguisher should remember the basic rul...

What Is an Ethernet Cable? Devices in a wired network are usually connected physically to a server, modem, router, or each other with Ethernet cables. Each end of an Ethernetcable has a connector called an RJ45 connector. A Registered Jack 45 (RJ45) connector is a standard type of physical connector for network cables. RJ45 connectors are used almost exclusively with Derek Abella / Lifewire Although Ethernet cables have gone through several generations of speed improvements, the RJ45 connector that appears on the ends of the cables has not changed. Whether you use Category 3 through Category 6 cables, the connectors are RJ45. Category 7 cables can be terminated with RJ45 connectors, but they are specialized versions called GigaGate45 (GG45). The GG45 connectors are backward compatible with RJ45 connectors. Plugs, Pins, and Crimping RJ45 plugs feature eight pins to which the wire strands of a cable interface electrically. Each plug has eight locations spaced about 1 mm apart into which individual wires are inserted using special cable crimping tools. The industry calls this type of connector 8P8C, shorthand for eight position, eight contact. Ethernet cables and 8P8C connectors must be crimped into the RJ45 wiring pattern to function properly. Technically, 8P8C can be used with other types of connections besides Ethernet; it is also used with RS-232 serial cables, for example. However, because RJ45 is the predominant usage of 8P8C, industry professionals often use the two te...

IT Essentials v7.0 & 7.02 IT Essentials 7.02 - Chapter 1 Answers Online Test Answers Online Test IT Essentials 7.02 - Chapter 2 Answers Online Test Answers Online Test IT Essentials 7.02 - Lab Answers Answers Cisco Netacad ITE v7 – IT Essentials (Version 7.00) – IT Essentials 7.0 Chapter 1 Exam Answers 2022 2023 IT Essentials (Version 7.00) – IT Essentials 7.0 Chapter 1 Exam Answers 2022 2023 Full 100% • A customer comes into a computer parts and service store. The customer is looking for a device to help a person with accessibility issues input instructions into a laptop by using a pen. What device should the store owner recommend to accomplish the required task? • stylus • biometric scanner • keyboard • NFC device • A customer comes into a computer parts and service store. The customer is looking for a device to provide secure access to the central server room using a retinal scan. What device should the store owner recommend to accomplish the required task? • biometric scanner • keyboard • NFC device • flatbed scanner • A customer comes into a computer parts and service store. The customer is looking for a device to help when repairing an airplane and that will allow the customer to see and interact with the repair manual at the same time. What device should the store owner recommend to accomplish the required task? • AR headset • biometric scanner • keyboard • NFC device • A customer comes into a computer parts and service store. The customer is looking for a device to...

IT Essentials v7.0 & 7.02 IT Essentials 7.02 - Chapter 1 Answers Online Test Answers Online Test IT Essentials 7.02 - Chapter 2 Answers Online Test Answers Online Test IT Essentials 7.02 - Lab Answers Answers Refer to the exhibit. How is the connector used in a PC? IT Essentials 7 Chapter 1 Quiz Answers 02 • to connect optical drives • to connect disk drives • to connect legacy floppy drives • to supply power to various internal components Answers Explanation & Hints: This connector is called a 6/8-pin PCIe power connector and is used to supply power to various components of the computer.

NOTE: If you have the new question on this test, please comment Question and Multiple-Choice list in form below this article. We will update answers for you in the shortest time. Thank you! We truly value your contribution to the website. IT Essentials v7.0: 1. What is a good safety precaution to take when opening a computer case? • Place tape over the case edges that are sharp. • Remove the cover (or door) of the computer case before installing or removing parts. • Remove the connections to the front panel before extending the case fully open. • Ensure that any loose clothing such as a tie or shirt stay in constant contact with the case when handling internal components. Explanation: Computer cases can easily be a hazard to technicians. Before working inside a computer, examine the case edges and put tape over any of the sharp edges to prevent physical harm. A case is opened, but seldom removed when installing or removing parts. Loose clothing should be secured before you work inside a computer. 2. What does the “A” in P-A-S-S remind a person to do while using a fire extinguisher? • Aim the fire extinguisher at the flames. • Aim the fire extinguisher at the base of the fire. • Activate the fire extinguisher. • Adjust the pressure. Explanation: To install a power supply into a PC tower case, open the case, align the power supply with the case holes, and use screws to attach the power supply to the case. 4. A technician is replacing a power supply. Which two factors should ...

IT Essentials v7.0 & 7.02 IT Essentials 7.02 - Chapter 1 Answers Online Test Answers Online Test IT Essentials 7.02 - Chapter 2 Answers Online Test Answers Online Test IT Essentials 7.02 - Lab Answers Answers Refer to the exhibit. How is the connector used in a PC? IT Essentials 7 Chapter 1 Quiz Answers 02 • to connect optical drives • to connect disk drives • to connect legacy floppy drives • to supply power to various internal components Answers Explanation & Hints: This connector is called a 6/8-pin PCIe power connector and is used to supply power to various components of the computer.

NOTE: If you have the new question on this test, please comment Question and Multiple-Choice list in form below this article. We will update answers for you in the shortest time. Thank you! We truly value your contribution to the website. IT Essentials v7.0: 1. What is a good safety precaution to take when opening a computer case? • Place tape over the case edges that are sharp. • Remove the cover (or door) of the computer case before installing or removing parts. • Remove the connections to the front panel before extending the case fully open. • Ensure that any loose clothing such as a tie or shirt stay in constant contact with the case when handling internal components. Explanation: Computer cases can easily be a hazard to technicians. Before working inside a computer, examine the case edges and put tape over any of the sharp edges to prevent physical harm. A case is opened, but seldom removed when installing or removing parts. Loose clothing should be secured before you work inside a computer. 2. What does the “A” in P-A-S-S remind a person to do while using a fire extinguisher? • Aim the fire extinguisher at the flames. • Aim the fire extinguisher at the base of the fire. • Activate the fire extinguisher. • Adjust the pressure. Explanation: To install a power supply into a PC tower case, open the case, align the power supply with the case holes, and use screws to attach the power supply to the case. 4. A technician is replacing a power supply. Which two factors should ...

Explanation: The power supply converts alternating current (AC) power coming from a wall outlet into direct current (DC) power, which is of lower voltage. DC power is required for all the components inside the computer. 2. Which two motherboard components connect to the Northbridge chipset? (Choose two.) NIC USB 2.0 devices USB 3.0 devices FireWire devices RAM * video card * Explanation: The Northbridge chipset allows the fastest components to interface with the CPU at the front side bus speed, namely the RAM and video card. All other components like the USB, FireWire, and the expansion buses communicate with the CPU via the Southbridge chipset. 3. What type of connector can be used to connect an internal hard drive to the motherboard? USB SATA * eSATA Thunderbolt Explanation: A KVM switch is commonly used to connect one mouse, keyboard, and monitor to multiple computers. 5. Which is the correct procedure to put out a fire with a fire extinguisher after the pin is pulled? Aim just above the flame, squeeze the lever, and sweep from side to side. Aim at the base of the flame, squeeze the lever, and sweep from side to side. * Aim directly at the center of the flame, squeeze the lever, and sweep from side to side. Aim at the base of the flame, squeeze the lever, and sweep from the base to the top of the flame. Aim just above the flame, squeeze the lever, and sweep from the top to the base of the flame. Explanation: Anyone using a fire extinguisher should remember the basic rul...

What Is an Ethernet Cable? Devices in a wired network are usually connected physically to a server, modem, router, or each other with Ethernet cables. Each end of an Ethernetcable has a connector called an RJ45 connector. A Registered Jack 45 (RJ45) connector is a standard type of physical connector for network cables. RJ45 connectors are used almost exclusively with Derek Abella / Lifewire Although Ethernet cables have gone through several generations of speed improvements, the RJ45 connector that appears on the ends of the cables has not changed. Whether you use Category 3 through Category 6 cables, the connectors are RJ45. Category 7 cables can be terminated with RJ45 connectors, but they are specialized versions called GigaGate45 (GG45). The GG45 connectors are backward compatible with RJ45 connectors. Plugs, Pins, and Crimping RJ45 plugs feature eight pins to which the wire strands of a cable interface electrically. Each plug has eight locations spaced about 1 mm apart into which individual wires are inserted using special cable crimping tools. The industry calls this type of connector 8P8C, shorthand for eight position, eight contact. Ethernet cables and 8P8C connectors must be crimped into the RJ45 wiring pattern to function properly. Technically, 8P8C can be used with other types of connections besides Ethernet; it is also used with RS-232 serial cables, for example. However, because RJ45 is the predominant usage of 8P8C, industry professionals often use the two te...

IT Essentials v7.0 & 7.02 IT Essentials 7.02 - Chapter 1 Answers Online Test Answers Online Test IT Essentials 7.02 - Chapter 2 Answers Online Test Answers Online Test IT Essentials 7.02 - Lab Answers Answers Cisco Netacad ITE v7 – IT Essentials (Version 7.00) – IT Essentials 7.0 Chapter 1 Exam Answers 2022 2023 IT Essentials (Version 7.00) – IT Essentials 7.0 Chapter 1 Exam Answers 2022 2023 Full 100% • A customer comes into a computer parts and service store. The customer is looking for a device to help a person with accessibility issues input instructions into a laptop by using a pen. What device should the store owner recommend to accomplish the required task? • stylus • biometric scanner • keyboard • NFC device • A customer comes into a computer parts and service store. The customer is looking for a device to provide secure access to the central server room using a retinal scan. What device should the store owner recommend to accomplish the required task? • biometric scanner • keyboard • NFC device • flatbed scanner • A customer comes into a computer parts and service store. The customer is looking for a device to help when repairing an airplane and that will allow the customer to see and interact with the repair manual at the same time. What device should the store owner recommend to accomplish the required task? • AR headset • biometric scanner • keyboard • NFC device • A customer comes into a computer parts and service store. The customer is looking for a device to...